The Lion Punch Forge engraving adapter was invented to bridge a gap between
hand engraving and expensive air gravers. We believe in the manufacturing of
functional, reliable, and long lasting products.
Affordability and versatility were also driving factors for creating an
adapter for commercially available hammer hand pieces, like the Foredom H.15 or
H.15D (with duplex spring)
The H.15 or H.15D Hammer Handpiece has hammering action for use at various
speed (0-5,000 rpm is recommended) by jewelers for diamond and stone setting
and decorative work. Comes with an anvil point (HP10177).
Hammer has 1/32" stroke and its impact can be adjusted from light to heavy by
turning the silver knurled adjusting ring.
Optional points are available: 6 different shaped Anvil Points (HP10171,
HP10172, HP10173, HP10175, HP10176 and HP10179); Pave Point (R15PT), and Stylus
with Carbide Tip (HP10212).
Specification for H.15 Hammer ( 1 year limited warranty)
1/4" diameter. at tip,
wt. 3.65 oz.,.
Specification of H.15D Hammer with Duplex Spring (1 year limited warranty,
spring are subject to breakage and are NOT covered under warranty
1/4" Dia. at tip
wt. 5.2 oz.
Member of the Foredom system of "Interchangeable Handpieces".
Requires periodic lubrication.
One-Year Limited Warranty.
The LPF adapter uses 1/8" diameter round shank gravers. When affixed to the
hammer hand piece it allows the user to power engrave with a tool they probably
already have, the flex shaft.
The adapter will allow makers to engrave, carve and texture without having to
purchase other expensive alternatives that take up valuable bench space just to
get started in power engraving.
Square Shaped Graver
Foredom Hammer Handpiece - Select type from drop down menu- H.15 or H.15D
(with duplex spring)
If you would like to purchase this as a kit with the Foredom SR Motor, please