* Take the guess work out of your sharpening routine with the Pro Sharpening
Supply Angle Guide!!

* Along with your Knife Sharpening Jig you get a 5 Pack of Sharpening Sanding
Belts to get you sharpening right out of the box.

* Fits most 1X30 Belt Sanders that have a 1" Platen.

* Sharpen angles from 10 degrees to 45 degrees

* Durable all metal construction / 2 1/2" x 1 1/4" (Width Includes Tension
Dials)

* 100% Satisfaction Guarantee. If you are not satisfied for any reason,
contact us for an immediate replacement or refund (including shipping).

* The 1x30 angle guide takes the guess-work out of finding and keeping the
right angle in the sharpening process. It is intended for use with standard 1"
sharpening belts and is not intended for use with the leather belts.

It simply attaches to the platen behind the belt and you can choose whatever
angle you like for sharpening. Then just rest the tool on the guide and start
the belt until you have raised a burr. Be careful not to overheat the metal and
keep a tray of water nearby for cooling.

The angle guide is perfect for anyone wanting to customize sharpening.
Different tools benefit from being sharpened at different angles, and it can
also be nice to have duplicates of the same tools with different angles for
different functions. You can also create compound bevels that are much more
accurate and create strength for the final cutting edge which will give your
edges more durability and increase their longevity.

The Knife Sharpening Angle Guide will be very close to the belt when
installed. That is in order to get the most accurate angle possible. It is
meant to be used with higher grit belts, which are thinner and have less
abrasive material that can rub the metal on the angle guide. If your Angle
Guide is rubbing not he belt, simply use a coarse belt to remove a little of
the metal from the angle guide. It is also possible to bend the guide metal
back a little bit, but it's easier to use a coarse belt. Then you will have
room for your higher grit belts to sharpen and hone knives.

Smaller knives and larger knives work well with the 1x30 sharpening angle
guide. Its all metal construction will ensure that your angle gauge will last
for many years. Similar systems are set up with sharpening stones and rod
guided systems, but who has the time? If you want a quick way to establish a
bevel, or a final cutting edge, then look no further than the Pro Sharpening
Supply Knife Sharpening Angle Guide!