• Slightly wider tooth spacing
• 150mm blade length
• Blade thickness of 0.3mm, with 0.49mm kerf
• Pecker tooth at the tip allows you to start a cut in the middle of a panel
• Suitable for small sawing tasks and close joints
This is a smaller version of the Dozuki has a 150mm long blade with 30mm depth
of cut. The blade thickness is 0.3mm and the kerf 0.49mm, with its fine 18tpi
it makes a handy saw for a range of small sawing tasks and close joints. A
special pecker tooth at the tip allows you to start a cut in the middle of a
panel. The overall length is 370mm.